Jiangyin Wanlu Machine Manufacturing Co., Ltd.
Main products:Aeration Hose,Soaker Hose,PT-350 Type Grinder,LS-400 Coarse Grinder,TP-700 Grinder
Products
Contact Us
  • Contact Person : Mr. kong zhuqiang
  • Company Name : Jiangyin Wanlu Machine Manufacturing Co., Ltd.
  • Tel : 86-510-86384909
  • Fax : 86-510-86384909
  • Address : Jiangsu,JiangYin,Jiannan Village, ZhuTang Town
  • Country/Region : China
  • Zip : 214415

The process of rubber powder production from steel wire tires

The process of rubber powder production from steel wire tires
Product Detailed
The process of rubber powder production from waste radial tyres.

The process of rubber powder production from steel wire tires

1

 

2

 

3

 

4

 

5

 

6

 

7

 

8

Tire cutting

Rolling out the tire bead wire

Coarse Crushing

Moderate Crushing

Fine Grinding

Magnetic Separation

Further Fine Grinding

Filtering

 

1. Using Q-1200 Tire Cutter. To cut the whole tire into 2 tire sidewall and 1 tire bead.2. Using NS-15 Tire bead wire rolling machine. To crush and separate the steel wire and rubber of waste tires.3. Using PT-1000 Tire Crusher. After process 2, to break the sidewall and the tire crown into rubber pieces of 50cm×50cm.4. Using TP-700 Grinder. To crush the rubber pieces of 50mm×50mm to rubber particles of 15mm.5. Using 55kw Grinder. To crush rubber particles of 15mm to rubber powder of 15-30mesh (1-2mm).6. Using C200 Magnetic conveyor. To remove the steel wire while in the process 5.7. Using ZM-22 Rubber Grinder. To further grinder the rubber powder of 15-30mesh to 40-80mesh.8. Using LX-300 Centrifugal Machine. To filter the rubber powder from process 7, the unqualified products will be back to  and be crushed again, qualified products can be packaged.

 

The process of rubber powder production from steel wire tires



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.